Need help?Do you have a question about the Sony TA-313 and is the answer not in the manual?
General| Input Sensitivity | 150mV (line) |
|---|---|
| Signal to Noise Ratio | 70dB (MM) |
| Type | Stereo Amplifier |
| Speaker Load Impedance | 4Ω to 16Ω |
| Dimensions | 410 x 145 x 310mm |
| Weight | 7.2kg |
| Channel Separation | 50dB |
Warning about critical components for safe operation and replacement.
Procedure to adjust the meter for accurate power indication.
Complete circuit schematic showing all sections and connections.
Identification of safety-critical components marked with shading and symbols.
Comprehensive list of semiconductors and capacitors with part numbers.
List of resistors and guidance on replacing safety-critical components.
To Next Page
