Sony TA-AV421 Service Manual

SERVICE
MANUAL
US Model
Canadian Model
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS Power requirements
POWER OUTPUT AND TOTAL HARMONIC Power consumption
DISTORTION:
Accessories
supplied
With 8-ohm loads, both channels driven,
from 40 - 20,000 Hz; rated 110 watts per
channel minimum RMS power, with less
than 0.9% total harmonic distortion from
250 milliwatts to rated output.
Frequency response
PHONO: RIAA curve
CD, VIDEO: 10 Hz - 50 KHz +3 dB
eo
Input
CD,
VIDEO
50
kilohms
notice.
Output
SPEAKER:
Accepts
speakers
of
8
to
16
ohms
HEADPHONES: Accepts
headphones with low and high
impedance
Rear: 10 W + 10 W
(at front off, 8 ohms)
BASS: £10 dB
TREBLE: +8 dB
Dimensions Approx. 430 x 145 x 360 mm
(win/d)
(17 x 5%, x 14'/, inches)
Weight Approx. 9.5 kg (20 Ib 15 oz) net
120 V AC, 60 Hz
220W (US model)
430VA (Canadian model)
AM loop antenna (1)
FM wire antenna (1)
Remote Commander RM-U421 (1)
Sony batteries SUM-3(NS) (2)
Audio signal connecting cord
(phono plug x 2 >
phono plug x 2) (1)
SYSTEM CONTROL 1 cord (1)
SYSTEM CONTROL 2 cord (1)
SYSTEM CONTROL 3 cord (1)
(For USA model, the SYSTEM
CONTROL 1 and 3 is equipped on
the TC-W421.)
Model only for Canada:
Headphone MDR-006 (1)
Plug adaptor (1)
Design
and
specifications
are
subject
to
change
without
INTEGRATED
STEREO
AMPLIFIER
SONY.

Sony TA-AV421 Specifications

General

Input Sensitivity	150mV (line)
Signal-to-Noise Ratio	100 dB
Dimensions	430 x 150 x 370 mm
Output	Speaker terminals
Speaker load impedance	8 ohms
Power Output	100W per channel (8 ohms, 20Hz-20kHz, 0.09% THD)