Sony TA-E1000ESD - Page 33

Simulating the Wall Material
When sound is reflected by a wall made of soft material The WALL parameter conirols the level of high frequencies
such as wood or a wall covered with a curtain, the high- to simulate the wall material. The standard wall made of
frequency components are reduced. A hard wall is highly wood is designated as 1, and you can adjust this parameter
reflective and does not significantly effect the frequency from 0.5 to 2.0. The higher the number set, the harder the
response of the reflected sound. wall simulated.
Wall 0.5
Early
reflections
Reverberation
Frequency
Wall 2.0
Early reflections and reverberation
Frequency High
Main
unit
Remote
commander
MAIN
PARAMETER
4
Press
MAIN
PARAMETER
to
select
ROOM
=,
WAN
of_)
SIZE
-
WALL.
DIGITAL, PROCESSING CONTROL
| 2 Adjust the WALL parameter. >
33