Sony TA-E2000ESD - Page 53

Messages in the Display
The following messages will appear in the display to
notify you that you have attempted to operate the
amplifier incorrectly.
Can not use
© Appears when you press the EFFECT REC button
while SOURCE DIRECT has been already pressed.
The EFFECT REC button should be pressed when
digitally-processed sounds are to be recorded.
¢ Appears when you press the SET button while
EFFECT REC has been already pressed.
The SET button should be pressed when a program
source is to be recorded while you are listening to or
watching another program source.
¢ Appears when you press the EFFECT REC button
while the REC OUT SET indication has already
appeared.
The EFFECT REC button should be pressed when
digitally-processed sounds are to be recorded.
¢ Appears when you press the CHARACTER button to
change the title of a sound field which was preset at
the factory.
The titles of the sound fields preset at the factory are
fixed and cannot be changed.
e Appears when you press the TEST TONE button in a
mode other than DOLBY SUR.
You can hear the test tone only in DOLBY SUR. mode
Visual only
Appears when you press an input select button from
TAPE1 to DIGITAL which does not have a video signal
while the <4 indication appears for mixing
operation.
An input select button from VIDEO1 to TV which does
have a video signal should be pressed while
appears.
“Dynamics off” flashes
When you try to adjust dynamics while the DYNAMICS
indicator is not lit.
“Equalizer off” flashes
When you try to adjust parametric equalizer while the
PARAMETRIC EQ indicator is not lit.
“Surround off” flashes
When you try to adjust surround while the SURROUND
indicator is not lit.
53