Need help?Do you have a question about the Sony TA-ZH1ES and is the answer not in the manual?
General| Type | Headphone Amplifier |
|---|---|
| Supported Impedance | 8-600 Ohms |
| DSD Native Playback | Yes (up to DSD 22.4MHz) |
| DSEE HX | Yes |
| Output Power | 1200mW + 1200mW |
| Frequency Response | 4 Hz - 80, 000 Hz |
| Inputs | USB, Optical, Coaxial |
| Outputs | Balanced, Unbalanced |
| PCM Support | Up to 32-bit/384 kHz |
| Dimensions | 210 mm x 65 mm x 314 mm |
| Weight | 4.4 kg |
Provides instructions on how to use the device.
Provides precautions and product specifications.
Description of controls and indicators on the front panel of the amplifier.
Details of connectors and ports on the right side and rear panels.
Explanation of buttons and the display window on the top panel.
Explains the function of each button on the remote control for device operation.
Instructions on how to insert batteries into the remote control.
Guide to connecting WALKMAN and Xperia smartphones to the amplifier.
Steps for connecting AV equipment using analog or digital audio jacks.
Instructions for connecting the amplifier to a computer via USB.
How to connect headphones using balanced audio jacks.
How to connect headphones using unbalanced audio jacks.
Guide to using the PRE OUT jacks for audio output to other devices.
Steps for listening to music from these sources.
Detailed guide for connecting, driver installation, software setup, and playback from a computer.
Procedure to restore the amplifier's settings to their original factory state.
Solutions for power, remote control, and indicator problems.
Addresses no sound, multi-channel, and computer audio output issues.
Solutions for automatic volume, noise, and USB detection problems.
Essential guidelines for safe operation and handling of the unit.
Warnings about installation, power, environment, and proper disposal.
Region-specific notices and disposal instructions for electronics and batteries.
Guidance on placement, cleaning, and safe operation practices.
Advice for safe listening volume and minimizing static electricity effects.
Information regarding trademarks, software protection, and legal disclaimers.
Technical details for the headphone output and impedance.
Specifications for various input ports, USB, WALKMAN, COAX, OPT, LINE IN.
Details on pre-out jacks, power requirements, dimensions, and mass.
Highlights of the amplifier's hybrid DA amplification, audio format support, and build quality.
To Next Page
