To Next PageTo Next Page
Need help?Do you have a question about the Sony TA-DX8 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Power Output | 100W per channel (8 ohms) |
| Frequency Response | 10Hz - 100kHz (+0 -1dB) |
| Input Sensitivity | 250mV (line) |
| Signal-to-Noise Ratio | 110dB |
| Dimensions | 430 x 150 x 380 mm |
| Weight | 12.5 kg |
| Total harmonic distortion | 0.003% |
| Output Power | 100W per channel (8 ohms) |
Technical specifications including power output, inputs, and satellite speaker impedance.
Details on power requirements, consumption, dimensions, and mass of the unit.
Identifies front, top, and rear controls and connectors on the unit.
Instructions for removing the outer cover and front panel section.
Explanation of symbols, notations, and component identification in diagrams.
Layout of the main board's printed wiring.
Schematic diagram for the main circuit board.
Printed wiring diagrams for panel, primary, and secondary boards.
Schematic diagrams for panel, primary, and secondary boards.
Diagram showing the location and assembly of external parts.
List of capacitors, diodes, and ICs with part numbers.
List of transistors and resistors with part numbers and specifications.
List of relays, fuses, switches, and terminal components.
Includes miscellaneous items and hardware list for the unit.
