SERVICE MANUAL
INTEGRATED STEREO AMPLIFIER
E Model
SPECIFICATIONS
TA-DX80
Ver 1.0 2001.03
9-929-592-11 Sony Corporation
2001C0500-1 Audio Entertainment Group
C 2001.3 General Engineering Dept.
TA-DX80 is the amplifier section in
MHC-DX80, MHC-VX888.
The following measured at AC 120, 220, 240 V 50/60 Hz
DIN power output (rated) 75 + 75 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
100 + 100 watts
(6 ohms at 1 kHz, 10% THD)
Inputs
MD/VIDEO (AUDIO) IN: voltage 450 mV/250 mV,
(phono jacks) impedance 47 kilohms
MIC: sensitivity 1 mV,
(phone jack) impedance 10 kilohms
Outputs
PHONES: accepts headphones of
(stereo mini jack) 8 ohms or more
FRONT SPEAKER: accepts impedance of 6 to 16 ohms
SURROUND SPEAKER: accepts impedance of 6 ohms
General
Power requirements
Mexican models: 120 V AC, 60Hz
E91 models: 220 V AC, 50/60 Hz
Other models: 120 V, 220 V or 230 – 240 V AC, 50/60Hz
Adjustable with voltage selector
Power consumption 180 watts
Dimensions (w/h/d) Approx. 150 × 360 × 343 mm
Mass: Approx. 5.5 kg
Design and specifications are subject to change without notice.
• Abbreviation
E91: 220 V AC area in E model
To Next Page
Need help?
General
