Sony TC-158SD Service Manual

SPECIFICATIONS
Power Requirements: AC 120V 60Hz (US, Canadian model)
AC 110, 120, 220 or 240V—50/60 Hz
(AEP, E model)
DC 6V
four batteries of size D (IEC designation
R20)
Sony Rechargeable Battery Pack BP-8H
(optional)
US Model
Canadian Model
AEP Mode!
E. Model
STEREO CASSETTE-CORDER
Fast Forward and
Rewind Time: Approx. 90 sec. (C-60, at 6V)
Recording System: 4-track 2-channel stereo
Speaker: 10cm (4 inches) dia.
Power Output: 700 mw
Bias Frequency: 105 kHz
12V
car
battery
with
Sony
Car
Battery
Signal-to-noise
Ratio:
DOLBY
NR
OFF
Cord DCC-129 (optional)
Power Consumption: 12W
Dimensions: Approx. 350 (w) x 100 (h) x 240 (d} mm
133/4 (w) x 4 (h) x 93/g (d) inches
including projecting parts and controls
Weight: Approx. 4.8kg, 10 lb 9 0z with batteries
*‘Dolby’ and the double-D symbol are the trade marks of
Dalby Laboratory Inc. Noise reduction system manufac-
tured under license from Doiby Laboratory Inc.
“0dB =0.775V
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING ON THE
SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE.
CRITICAL TO SAFE OPERATION. REPLACE THESE:
COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
With Ferri-Chrome Cassette
59 dB at peak level (NAB)
57 dB (DIN, 1975 rev.)
49 dB (DIN, old)
With chromium dioxide cassette
55 dB at peak level (NAB)
DOLBY NR ON
Improved
by
5dB
at
1kHz,
10dB
above
SkHz
Total Harmonic
Distortion: 1.3%
* Contistued on — 2-
>
CUATION
OF
VOLTAGE
SELECTOR
SETTING
“When
changing
a
voltage
of
the
voltage
selector,
be
“sure
to
c
the
ac
power
cord.
a
i) 5O
SERVICE MANUAL

Sony TC-158SD Specifications

General

Brand	Sony
Model	TC-158SD
Category	Cassette Player
Language	English