Sony TC-161SD - Service Manual

Power Requirements:
Track System:
Tape:
Tape Speed:
Recording Time:
Frequency Response:
Signal-to-Noise Ratio:
Wow and Flutter:
Recording Bias Frequency:
Inputs:
SPECIFICATIONS
AC 110, 127, 220 or 240 V, 50/60 Hz, 25 W
(AEP) :
“AC 100, 110, 120, 127, 220 or 240 V, 50/60 Hz,
18 W (General Export)
’ Four-track two-channel stereo
SONY tape cassette or equivalent
1% ips (4.8 cm/s)
2.0 hrs total (with cassette C-120)
NAB ~ 2
20 ~ 17,000 Hz with chromium dioxide cassette
20 ~ 15,000 Hz with ordinary cassette
DIN
40 ~ 15,000 Hz with chromium dioxide cassette
40 ~ 12,500 Hz with ordinary cassette
49 dB (DOLBY switch OFF)
With DOLBY switch ON,
S/N improves 5 dB at 1 kHz
and 10 dB at 5 kHz.
0.1 % WRMS (weighted root mean square)
{+ 0.3 % DIN)
Approx. 85 kHz
M!ICROPHONE(two}
tmpedance : low impedance
Maximum sensitivity : 0.2 mV (—72 dB)
LINE IN (two)
Impedance 100 kQ.
Maximum: sensitivity : 60 mV {(—22 dB)
Outputs:
REC/PB (DIN) Connector:
Semiconductors:
Motor:
Record/Playback Head:
Erase Head:
Dimensions:
Weight:
LINE OUT (two)
Impedance : greater than 10 k{2
Output level : 0.78 V{0 dB) with
100 kQ load
HEADPHONE
tmpedance > 8
Output level : 31 mV (—28 dB)
Input Impedance :3.7kQ
Output Impedance: 7.0 kQQ.
2 FET, 40 transistors and 30 diodes
HC-414 B (hysteresis motor)
PF 133-3602 (1 k§2/1 kHz)
EF 110-36E (400 §2/50 kHz)
1534 (W) x 5(H) x 10 3%” (D)
(400 x 127 x 276 mm)
14 Ib 4 oz (6.6 kg)

Sony TC-161SD Specifications