Sony TC-188SD - Motor and Timing Switch Position Adjustments

Motor Switch (S602) Position Adjustment Timing Switch (S601) Position Adjustment
— Stop Mode — — Stop Mode —
Loosen adjustment screw and adjust the Loosen the screws and adjust position of the
position
of
the
switch
for
the
specified
clearance
switch
bracket
as
marked
B
in
figure
below.
between the switch leaves. After the adjustment, tighten the screws.
After the adjustment, tighten and lock the
screw with a suitable locking compound.
motor switch (S602) 5.5—6.5mm
(7/32—VY%q")
timing switch (S601)
adjustment screw
brake
release
lever
Contacts.
switch bracket
Forward Torque Adjustment
— Playback Mode —
Use type CQ-102A cassette torque meter.
tension arm
adjustment plate
change the hooking position
(Approx. 3g-cm/one step)
Specification: 28—50 g-cm
(0.39—0.69 oz-inch)