Why can't my Sony Trinitron KV-27FS120 receive higher number channels (UHF) with an antenna?
If your Sony TV isn't receiving higher number channels (UHF) when using an antenna, make sure the Cable setting is set to Off in the Channel menu. You may also need to perform Auto Program to add channels not currently in the memory.
What to do if there is a black box on the screen of my Sony Trinitron KV-27FS120?
If your Sony TV displays a black box on the screen, you may have selected a text option in the Setup menu when no text is available. To disable this, select Off in the Caption Vision option. If you intended to use closed captioning, select CC1-4 instead of Text1-4.
How to adjust color on Sony Trinitron KV-27FS120?
If your Sony TV doesn't display color, adjust the Color setting in the Video menu.
What to do if I lost parental password on Sony Trinitron KV-27FS120 TV?
If you've lost the parental password for your Sony TV, enter the following master password in the password screen: 4357. After using this master password, it's important to create a new, personal password. Note that the master password cannot unlock channels that are currently blocked.
Why does my Sony Trinitron KV-27FS120 TV have double images or ghosts?
If you're seeing double images or ghosts on your Sony TV, check your outdoor antenna or contact your cable service provider.
What to do if my Sony Trinitron KV-27FS120 TV won't turn on after a blackout and the timer LED is flashing?
If your Sony TV was affected by a blackout or power outage and now won't turn on with a flashing timer LED, press the POWER button on your remote control or on the TV's front panel.
Why does my Sony Trinitron KV-27FS120 TV have dotted lines or stripes?
If your Sony TV has dotted lines or stripes on the screen, try adjusting the antenna. Also, move the TV away from other electronic equipment, as they can create electrical noise that interferes with TV reception.
Why cable stations don’t seem to work on my Sony Trinitron KV-27FS120 TV?
If your Sony TV doesn't seem to be picking up cable stations, ensure that the Cable setting is set to On in the Channel menu. If needed, perform Auto Program to add any channels that aren't currently stored in the memory.
Why is there low or no audio on my Sony Trinitron KV-27FS120 TV with cable box?
If you are experiencing low or no audio with your Sony TV and cable box, some cable boxes have their own volume controls. Check your cable box or its remote for volume settings.
How to factory reset Sony TV?
To reset your Sony TV to its original factory settings, turn on the TV. Then, while pressing and holding the RESET button on the remote control, also press the POWER button located on the TV's front panel. The TV will power off and then turn back on. Once it restarts, release the RESET button.
Steps for safely removing the picture tube from the chassis, including anode cap handling.
Procedure for adjusting electron beam alignment for proper picture convergence and color purity.
Verifying and adjusting the HV hold-down circuit for safe operation.
Reference table for adjustment parameters and initial values for various circuits.
Overall system block diagram and detailed circuit schematics for component analysis.
Procedure to measure AC leakage current from exposed metal parts to ground.
Explanation of STANDBY/TIMER LED flash counts for identifying error causes.
To Next Page
General