To Next PageTo Next PageWhy my Sony TV cannot receive any channels when using cable?
If your Sony TV cannot receive any channels when using cable, the CABLE setting may not be set correctly in the SET UP menu. Ensure that CABLE is set to OFF in the SET UP menu.
General| Screen Size | 32 inches |
|---|---|
| Display Technology | CRT |
| Resolution | 480i |
| Aspect Ratio | 4:3 |
| Comb Filter | Yes |
| Inputs | Composite, RF |
Covers key technical parameters like power, dimensions, mass, and system details.
Details input/output connections, supplied, and optional accessories.
Highlights essential safety precautions for operation and component handling.
Procedures for AC leakage testing and verifying earth ground.
Guides initial setup and connection to antenna/cable.
Instructions for using connected video devices and remote programming.
Provides solutions for common operational problems.
Steps to remove the back panel of the TV.
Procedure for removing the main chassis from the TV.
Safe procedure for removing the high-voltage anode cap.
Detailed instructions for removing the picture tube safely.
Adjusts the convergence of electron beams for a sharp image.
Adjusts color convergence for accurate image display.
Adjusts the sharpness of the picture.
Adjusts screen brightness and contrast.
Corrects color balance for accurate picture rendition.
Confirms and readjusts specific components related to safety.
Verifies and adjusts the B+ voltage for proper operation.
Details adjustments performed using the remote control.
Procedure to enter the TV's service adjustment mode.
Verifies that adjustments are correctly saved in memory.
Lists adjustment parameters and their default/average values.
Maps feature settings to specific ID codes for model configuration.
Adjusts the sub-brightness level for picture quality.
Adjusts the sub-contrast level for picture quality.
Adjusts hue and color saturation for accurate picture.
Adjusts the position of on-screen display elements.
Adjusts the vertical size of the picture.
Adjusts the vertical position of the picture.
Adjusts the horizontal position of the picture.
Adjusts vertical linearity, correction, and pin parameters.
Adjustments specific to the P board components.
Adjusts the position of the Picture-in-Picture display.
Illustrates the physical locations of various circuit boards.
Contains detailed circuit diagrams and board layouts.
Illustrates chassis disassembly for various models.
Shows exploded views of the picture tube assembly for different models.
Common and variant parts for the A board across models.
Parts lists for AV, B, C, G, HS, HV, K, P, UV, WA, WB boards.
Lists included accessories and packaging details.
