To Next PageTo Next Page
Need help?Do you have a question about the Sony VPL-EW345 and is the answer not in the manual?
General| Brightness | 3200 Lumens |
|---|---|
| Resolution | WXGA (1280 x 800) |
| Display Technology | 3LCD |
| Zoom Ratio | 1.6x |
| Connectivity | HDMI, VGA, USB |
| Keystone Correction | Vertical: ±30 degrees, Horizontal: ±30 degrees |
| Output Terminals | Audio Out |
| Projection Size | 30" to 300" |
| Lamp Type | UHP |
| Power Consumption | 300W |
| Noise Level | 29 dB (Eco mode) |
Describes indicators, lens, rings, feet, security features, ventilation, and control panel keys.
Describes INPUT A (RGB/YPBPR) and INPUT B (RGB) analog video and audio inputs.
Describes INPUT C and INPUT D HDMI video and audio inputs.
Describes how to use the projector's remote commander buttons.
Describes the function of the projector's physical control panel buttons.
Explains connecting a computer via RGB input terminals.
Explains connecting a computer via HDMI input terminals.
Explains connecting the projector to a computer using a USB A-B cable.
Explains connecting the projector to a network via a LAN cable.
Explains connecting a computer to the HDBaseT transmitter.
Explains connecting video equipment to the HDBaseT transmitter.
Explains connecting network equipment to the HDBaseT transmitter.
Covers plugging in, turning on, connecting equipment, and selecting input.
Explains how to use the Keystone feature for distortion correction.
Explains how to access and navigate through the projector's menus.
Explains how to select and adjust settings within the menus.
Describes Picture Mode, Contrast, Brightness, Color, Hue, Color Temp, Sharpness.
Explains how to change the aspect ratio for different input signals.
Configures IP address, wired network, and wireless settings.
Explains how to shrink and adjust the position of the projected image.
Explains how to connect and access the projector's control window.
Configures the wired network settings for the projector.
Configures the wireless network settings for the projector.
Sets up the projector to function as a wireless access point.
Sets up the projector to connect to an existing wireless access point.
Explains the features and requirements for network presentation.
Guides through the installation of the network presentation software.
Guides through starting the network presentation software.
Explains LAN Mode and AP Mode for connecting to the projector.
Lists common error codes for Projector Station and their solutions.
Guides through starting the USB Display application for playback.
Details troubleshooting steps based on indicator light status.
Lists on-screen messages and provides corresponding remedies.
Troubleshoots power not turning on and no image displayed.
Troubleshoots application errors and network connection issues.
Troubleshoots aspect ratio problems and trapezoidal distortion.
Troubleshoots dark/bright images and lack of picture clarity.
Provides step-by-step instructions for replacing the projector lamp.
Provides critical safety information regarding hot lamps.
Provides step-by-step instructions for cleaning the projector's air filter.
Warns about dust accumulation and potential hazards from a dirty filter.
Lists compatible computer signal resolutions and their supported terminals.
Explains projection distance and height for floor mounting configurations.
Provides projection distance and height data for EW models.
Provides projection distance and height data for EX models.
Explains projection distance and height for ceiling mounting configurations.
Provides distance/height data for ceiling mount EW models.
Provides distance/height data for ceiling mount EX models.
