How to fix Sony VPL-EX50 Projector when the power is not turned on?
If the Sony Projector's power is not turning on, wait about 90 seconds before attempting to turn it on again, especially if it was recently turned off. Make sure that the lamp cover and the air filter cover are securely closed and attached.
What to do if Sony VPL-EX50 Projector flashes red 6 times?
If the '/1' indicator flashes red six times on your Sony Projector, unplug the AC power cord from the wall outlet after the '/1' indicator goes out. Then, plug the power cord back into the wall outlet and turn the projector on again. If the '/1' flashes in red and the problem persists, the electrical system has failed.
What to do if my Sony VPL-EX50 has no picture?
If your Sony Projector shows no picture, ensure all cable connections are correct and securely connected. Verify that the input selection on the projector matches the source you're using. If the picture is muted, press the 'PIC MUTING' key to unmute it. Also, if you're using a computer, make sure its signal is set to output only to an external monitor.
How to fix a noisy picture on a Sony Projector?
To resolve a noisy picture on your Sony Projector, try changing the desktop pattern on the connected computer. The noise may appear depending on the combination of the number of dots input from the computer and the number of pixels on the LCD panel.
What to do if Sony VPL-EX50 picture is not clear?
If your Sony Projector's picture is not clear, start by adjusting the focus. If that doesn't work, condensation may have accumulated on the lens. Leave the projector on for about two hours to allow the condensation to clear.
How to stop Sony VPL-EX50 picture from flickering?
If the picture on your Sony Projector flickers, adjust the 'Dot Phase' in the Input setting menu.
Contains FCC compliance statement for Class B digital devices.
Manufacturer and model information, FCC compliance statement.
General safety guidelines for operation and handling.
Recommendations for optimal picture quality related to lighting.
Advice on ventilation and avoiding obstructions.
Instructions for cleaning the projector's exterior and components.
Common power-related symptoms and their remedies.
Common picture-related issues and solutions.
Common sound-related issues and solutions.
Troubleshooting for the remote control.
Explanation of indicator light status and meanings.
List of warning and caution messages with their meanings.
Contains FCC compliance statement for Class B digital devices.
Manufacturer and model information, FCC compliance statement.
General safety guidelines for operation and handling.
Recommendations for optimal picture quality related to lighting.
Advice on ventilation and avoiding obstructions.
Instructions for cleaning the projector's exterior and components.
Common power-related symptoms and their remedies.
Common picture-related issues and solutions.
Common sound-related issues and solutions.
Troubleshooting for the remote control.
Explanation of indicator light status and meanings.
List of warning and caution messages with their meanings.
General| Brightness | 2500 ANSI Lumens |
|---|---|
| Resolution | XGA (1024 x 768) |
| Contrast Ratio | 2000:1 |
| Display Technology | 3LCD |
| Zoom Ratio | 1.2x |
| Screen Size | 30 - 300 inches |
| Input Ports | VGA, S-Video, Composite, Audio |
| Lamp Type | UHP |
| Noise Level | 29 dB (Eco mode) |
| Power Consumption | 280W (Normal mode), 220W (Eco mode) |
| Lamp Life | 3000 hours (Eco mode), 2000 hours (Normal mode) |
To Next Page
