Do you have a question about the Sony VPL-EX3 and is the answer not in the manual?
Contrast ratio (typical) | 300:1 |
---|---|
Projector native resolution | XGA (1024x768) |
Digital zoom | 1.2 x |
Lamp power | 165 W |
Light source type | Lamp |
Service life of light source | 3000 h |
Number of built-in speakers | 1 |
Full HD | Yes |
I/O ports | - Input A: HD D-sub 15-pin (RGB / component); - Input B: HD D-sub 15-pin (RGB / component); - Video: S-Video, composite video; - Audio: 2 x stereo minijack; |
Dimensions (WxDxH) | 308 x 252 x 98 mm |
Weight | 2900 g |
---|
Defines the parameters of the RS-232C communication signal, including baud rate and bit configuration.
Explains the structure and byte allocation of commands transmitted via RS-232C.
Details the format for data transmission to and reception from the projector.
Describes the D-Sub 9 Pin and D-Sub 25 Pin assignments for RS-232C connection.
Outlines the sequence and rules for communication between the controller and projector.
Specifies rules for command sending, data reception, and error handling.
Provides estimated waiting times for the projector to return data after receiving a command.
Lists item numbers and data for VPL-ES3/EX3 projectors.
Continues listing item numbers and data for VPL-ES3/EX3, including status items.
Details the data values for ACK (acknowledgement) and NAK (negative acknowledgement).
Lists item numbers and data for VPL-ES4/EX4 projectors.
Continues listing item numbers and data for VPL-ES4/EX4, including status items.
Details the data values for ACK (acknowledgement) and NAK (negative acknowledgement).
Lists item numbers and data for VPL-EX5, EX50, EX5U, and EW5 projectors.
Continues listing item numbers and data for VPL-EX5 series, including status items.
Details the data values for ACK (acknowledgement) and NAK (negative acknowledgement).
Provides a list of 15-bit SIRCS codes for projector control commands.
Provides a list of 20-bit SIRCS codes for projector control commands.