14
Attaching the Terminal Cover
You can attach the supplied terminal cover when
the LAN terminal, INPUT D (HDMI), or INPUT E
(HDBaseT) is limited to use for connection.
Attaching the supplied terminal cover prevents
dust from entering the terminals and maintains a
neat appearance.
The terminal cover may not be attached depending on the
condition of the connected cables or installation methods,
such as directly placing the unit on the floor. However, this
has no impact on normal use.
1 Insert the tab of the terminal cover into the
slot and attach the terminal cover.
Make sure that the tab of the terminal cover is
firmly inserted.
1 Pull out the terminal cover while pressing the
tab.
Note
Removing the Terminal Cover
To Next Page
Loading...
Need help?
General
