Need help?Do you have a question about the Sony VPL-PHZ61 and is the answer not in the manual?
General| Matrix size | 0.64 \ |
|---|---|
| Matrix type | 3-panel (p-Si TFT active) |
| White light output | 7000 ANSI lumens |
| Native aspect ratio | 16:10 |
| Vertical scan range | 24 - 92 Hz |
| Horizontal scan range | 15 - 92 kHz |
| Projection technology | 3LCD |
| Contrast ratio (typical) | - |
| Screen size compatibility | 40 - 300 \ |
| Projector native resolution | WUXGA (1920x1200) |
| Keystone correction, horizontal | -30 - 30 ° |
| Projector brightness (economic mode) | 4700 ANSI lumens |
| RMS rated power | 16 W |
| Placement | Ceiling |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Presentation |
| Light source type | Laser |
| Service life of light source | - h |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 463 W |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 434 W |
| Power consumption (PowerSave) | 0.5 W |
| Built-in display | No |
| Focus | Manual |
| Throw ratio | 1.23:1 - 1.97:1 |
| Vertical lens shift range | -35 - 55 % |
| Horizontal lens shift range | -15 - 15 % |
| Composite video in | 1 |
| Serial interface type | RS-232C |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 0 |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 3840p |
| Analog signal format system | NTSC, PAL, SECAM |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Noise level | 35 dB |
| Number of OSD languages | 27 |
| Noise level (economic mode) | 32 dB |
| On Screen Display (OSD) languages | ARA, CHI (TR), CZE, DEU, DUT, ENG, ESP, FAS, FIN, FRE, GRE, HUN, IND, ITA, JPN, KOR, NOR, POL, POR, RUM, RUS, SLK, SWE, THA, TUR, VIE |
| Quantity per pack | 1 pc(s) |
| Current | 4.7 A |
Weight and Dimensions| Depth | 129 mm |
|---|---|
| Width | 422 mm |
| Height | 338 mm |
| Weight | 6800 g |
Details the steps for preparing the projector unit for operation, including accessory checks and initial setup.
Explains how to connect the projector to various devices and networks.
Covers the process of turning the projector on/off and making initial settings for projection.
Describes the status indication of the ON/STANDBY and WARNING indicators on the projector.
Provides instructions for cleaning the outer panel and air filter of the projector.
Offers guidance on installing the projector using a ceiling bracket, considering stability and air filter clearance.
Presents the physical dimensions of the projector from different views.
Crucial warnings about electrical shock, earthing, and handling power cords.
Cautions regarding battery replacement, disposal, and risks of explosion or fire.
Advice on safe operation, including disconnection devices and avoiding specific ports.
Details FCC rules, interference, and user cautions for US customers.
States compliance with Canadian ICES-003(A)/NMB-003(A) for radio interference.
Specifies that the apparatus is not for residential use due to potential radio interference.
Emphasizes eye safety when viewing the laser beam and using optical aids.
Provides links to warranty details for customers in USA, Canada, Europe, and Korea.
Illustrates the positions of important labels, including RG LABEL and CLASS 1 LABEL.
Specifies the power and wavelength of the laser diodes used in the projector.
Details the beam divergence angle based on zoom settings.
Covers voltage checks, liquid ingress, cord handling, and power disconnection safety.
Advises against looking into the lens, unsupervised use by children, and hand placement.
Guidance for dealers and installers on mounting, safety wires, and inspections.
Critical safety steps for ceiling mounting, emphasizing professional installation and safety wires.
Instructions on spacing, avoiding obstructions, and tilt limitations during installation.
Ensures proper positioning for portrait mode to maintain exhaust ventilation.
Avoids locations with extreme temperatures, humidity, dust, smoke, or specific disinfectants.
Detailed steps for safely cleaning the projector's lens and cabinet, including material compatibility.
Tips on screen illumination, normal heat dissipation, and stripe patterns on screens.
Information on normal fan noise and the function of the light sensor for image correction.
Caution for laser parts, product disposal, and normal LCD projector characteristics.
Advice on managing condensation and securing the projector on a network.
Recommends securing network access, changing default settings, and using firewalls.
Warns that the product's magnets may interfere with medical devices like pacemakers.
Directs users to the Help Guide for details on the software license agreement.
Lists all accessories included with the projector, such as remote commander and batteries.
Provides step-by-step instructions for installing the lithium battery in the remote commander.
Details how to connect the AC power cord to the projector's AC IN socket.
Explains how and when to install the light shield to prevent pale light on the screen.
Illustrates connecting the projector to a computer's HDMI output using an HDMI cable.
Provides important notes on using HDMI cables and compatibility with specific signals.
Describes connecting the projector to a network using a LAN cable through a hub or router.
Details connecting to an HDBaseT transmitter for computer, video, or network equipment.
Specifies requirements for HDBaseT cables, installation, and maximum transmission distance.
Shows how to connect a computer or video device to the HDBaseT transmitter.
Instructions for powering the projector on, off, and unplugging for long-term storage.
Guides through the initial setup process, including language and installation location.
Explains factors affecting projected image size and basic projection steps.
Details how to adjust the focus of the projected image using the focus ring.
Describes how to adjust the projected image size using the zoom lever.
Explains using H and V lens shift dials to adjust the projected image position.
Guides on using adjustable front feet to tilt the projector for image alignment.
Describes the normal operating status indicated by the ON/STANDBY and WARNING lights.
Explains the meaning of red, green, and orange lights for standby and warm-up modes.
Details the indicator status when the projector software is being updated.
Lists meanings of indicator flashes (twice, three times) and corresponding remedies.
Provides instructions for periodic cleaning of the air filter and ventilation holes.
Guides on removing the air filter cover and vacuuming dust from the filter area.
Details how to correctly attach the air filter to the cover, ensuring no gaps.
Outlines conditions requiring replacement of the air filter with a new one.
Step-by-step instructions for removing the old filter and installing a new one.
Lists materials of the air filter and guidance on disposal according to regulations.
Suggests using 4 screws for stability and proper positioning relative to the air filter cover.
Recommends seeking professional inspections for safe projector usage.
Provides front view measurements, including lens center and mounting surface.
Details side view measurements, including height and depth.
Presents top view measurements, showing width and lens center.
Shows bottom view measurements, including center of gravity and mounting holes.
Details specifications for ceiling mount holes, including screw size and torque.
To Next Page
