Sony Walkman MZ-N910 - Recorder Operation; Checking the Supplied Accessories

11
MZ-N910
3-9. DC Motor SSM22A (sled) (M602), DC Motor SSM18D (spindle) (M601),
DC Motor Unit (over write head up/down) (M603)
3-10. Holder Assy
3 two screws
(M1.4)
6 three self tap screws
5 motor base assy
9 DC motor unit (over write head up/down)
(M603)
7 DC motor SSM18D (spindle) (M601)
4 DC motor SSM22A (sled) (M602)
2 Remove two solders of the
flexible board.
1 Remove four solders of the
flexible board.
8 self tap screw
A
2 boss
1 boss
3 Open the holder assy.
4 Remove the holder assy in the direction of the arrow A .