To Next Page
J
Jennifer GomezJul 30, 2025
What to do if the lid of my Sony CD Player does not open?
- JJeffrey OrtizJul 30, 2025
If the lid of your Sony CD Player does not open, set the power sources again, or replace the exhausted battery with new ones.
What to do if the lid of my Sony CD Player does not open?
If the lid of your Sony CD Player does not open, set the power sources again, or replace the exhausted battery with new ones.
What to do if my Sony MD Walkman MZ-R70 CD Player recorder does not work or works poorly?
If your Sony CD Player recorder does not work or works poorly, check the following: * Ensure audio sources are securely connected. * Disable HOLD by sliding the HOLD switch. * If moisture has condensed inside, take the MD out and leave the recorder in a warm place with the lid open for several hours. * Charge or replace the battery. * Insert the battery correctly. * Wait until the disc indication rotates slowly. * Use a connecting cord without an attenuator. * Restart the operation by disconnecting all power sources, waiting 30 seconds, and reconnecting. * Reinsert the disc or rerecord.
How to fix a Sony CD Player when the rechargeable battery does not start charging?
If the rechargeable battery of your Sony CD Player does not start charging, ensure the battery and AC power adapter are correctly inserted or connected.
How to reduce static sound on my Sony CD Player?
If the sound from your Sony CD Player has a lot of static, move the recorder away from sources of strong magnetism.
How to find track marks on Sony CD Player?
To find track marks on your Sony CD Player, press X before pressing . or >.
General| Model | MZ-R70 |
|---|---|
| Recording Format | ATRAC |
| Playback Format | ATRAC |
| Line Out | Yes |
| Headphone Jack | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | 90 dB |
| Release Year | 1999 |
| Type | MiniDisc Player |
| Digital Input | Optical |
| Battery Type | AA battery |
| Battery Life | Up to 6 hours |
Illustrates connecting to audio sources like CD players for recording.
Steps for inserting an MD and starting the recording.
Compares digital (optical) and analog (line) inputs for connecting sources.
Detailed instructions for recording using an analog line input.
How to synchronize recording and use a microphone input.
Steps for inserting an MD and starting playback.
Instructions for erasing individual tracks or the entire MD.
Solutions for when the recorder fails to operate correctly.
