To Next PageTo Next PageWhy can't I edit tracks on my Sony CD Player?
If editing cannot be done on your Sony CD Player, it could be because the power source has been disconnected or a power outage has occurred during editing. The editing done to that point is not saved to the disc. Do the editing operation again.
How to fix a Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) that won't charge?
If the rechargeable battery of your Sony CD Player isn't charging, ensure it's correctly inserted and the AC power adapter is properly connected. If that doesn't work, try charging and discharging the battery several times to restore its normal life, especially if it's the first time using it or it has been unused for a long time. Also, make sure you are charging the battery at a temperature between +5°C (+41°F) and +35°C (+95°F), and use the AC power adapter instead of USB bus power from a computer.
What to do if “TRACK FULL” appears on my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) CD Player?
To continue recording on your Sony CD Player, you need to erase some unnecessary tracks. This is because repeated recording and erasing may cause fragmentation and scattering of data due to the MiniDisc system limitation.
Why does the battery of my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) CD Player drain so fast?
If the rechargeable battery in your Sony CD Player drains quickly, even when not in use, it might be because the Quick mode is set to “On”. If you set the Quick mode to “On”, the power stays on inside recorder even when there is no operation, causing the rechargeable battery life to shorten.
Why can't I erase non-audio data on my Sony CD Player?
If non-audio data cannot be erased on your Sony CD Player, it is because non-audio data cannot be erased with the Erase function. Confirm the contents by connecting the recorder to your computer.
Why is my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) not working properly?
If your Sony CD Player is not working or performing poorly, consider the following: * Charge the rechargeable battery. * Turn up the volume. * Insert a recorded disc. * Disable HOLD by sliding the HOLD switch to the opposite direction of the arrow. * Close the lid until it clicks. * Take the disc out and leave the recorder in a warm place for several hours until the moisture evaporates. * Connect the AC power adaptor firmly to the DC IN 3V jack on the recorder. * Charge the rechargeable battery, replace the dry battery with a new one, or use the supplied AC power adaptor. * Reinsert the disc or Rerecord the disc, or replace it with another disc. These issues can arise from a discharged battery, low volume, missing disc, HOLD function being activated, lid not being firml...
Why are some menu items missing on my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) CD Player?
If some menu items cannot be displayed on your Sony CD Player, the “Menu Mode” might be set to “Simple”. Set the “Menu Mode” to “Advanced” to display all the menu items.
Why is my Sony CD Player not recording correctly?
If you are unable to record correctly on your Sony CD Player, make sure you are recording in Hi-MD mode, as only Hi-MD mode can be used to record directly on this recorder without using a computer. Also, check that the audio sources are securely connected and that there is a digital signal from the portable CD player. When recording digitally, use the AC power adaptor and disable the anti-skip function on the CD player. Ensure you are using a connecting cord without an attenuator and adjust the recording level manually if needed. Disconnect the recorder from the computer during recording. If a power source was disconnected or a power outage occurred, the recording result is not recorded on the disc; make the recording again.
Why does my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) CD Player get hot while charging?
If your Sony CD Player is getting hot during charging, this is normal and poses no danger.
Why can't my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) CD Player play MP3 tracks?
If your Sony CD Player cannot play MP3 tracks, it might be because the MP3 track format is not supported by the recorder. This recorder only supports MP3 tracks (MPEG-1 Audio Layer-3/Sampling frequency 44.1 kHz) that have been transferred using the SonicStage software.
General| Category | CD Player |
|---|---|
| USB Interface | USB 2.0 |
| Model | MZ-RH10 |
| Recording Media | Hi-MD, MD |
| Compatibility | Mac OS X 10.2 to 10.4 |
| Display | LCD |
| Weight | Approx. 108g (3.9 oz) without battery |
| User Manual | Yes |
Identifies all buttons, jacks, and the display window on the recorder.
Details the meaning of each area and icon in the recorder's display.
Instructions for inserting the rechargeable battery into the unit.
Steps for charging the rechargeable battery using the AC power adaptor.
Steps for selecting source, starting, pausing, and stopping recording.
How to start playback and adjust the volume using controls.
Step-by-step guide on how to enter and use menu items.
Steps to connect a microphone and start recording.
How to manually adjust recording levels for optimal sound.
How to search for tracks by name, group, artist, or album.
Choosing from preset sound modes like Heavy, Pops, Jazz.
How to input titles for tracks, groups, albums, and discs.
Step-by-step guide for inputting track, group, artist, and disc names.
Steps for erasing specific tracks or groups.
Function to erase tracks, groups, or the whole disc.
Procedure to erase all contents on the disc.
How to fine-tune the point for dividing a track.
How to combine tracks by erasing unnecessary track marks.
Restores a disc to its original condition, erasing all data.
Step-by-step guide for connecting the recorder to a computer via USB.
Troubleshooting steps for problems related to battery charging.
Troubleshooting steps for problems encountered during recording.
Troubleshooting for errors like 'DISC FULL' and playback issues.
Troubleshooting playback skips, noise, volume, and sound output.
Troubleshooting problems related to editing and group functions.
Troubleshooting connection issues between computer and MD Walkman.
Troubleshooting computer use and understanding messages.
Troubleshooting general recorder malfunctions and display problems.
Explains common error messages and their remedies.
Explains additional error messages and their remedies.
Explains error messages concerning groups and power issues.
Explains error messages for disc and system operations.
Explains error messages related to disc and track limits.
Lists the necessary hardware and OS specifications for software installation.
Steps before installing software, like closing programs and disconnecting USB.
Instructions for finishing the software installation and restarting.
How to record and store audio data from an audio CD to My Library.
Steps to transfer audio data from computer's My Library to the MD Walkman.
Steps to transfer audio data back from the MD Walkman to My Library.
Steps for recording using MD Walkman operations in Simple mode.
How to start MD Simple Burner and use computer operations.
How to select tracks and get CD information for recording.
Steps to identify and check for software issues.
Common problems and solutions for software installation failures.
Troubleshooting issues where the computer does not recognize the MD Walkman.
