To Next PageTo Next PageWhy are the first few seconds of my tracks not recording on my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual)?
If the first few seconds of a track are not being recorded on your Sony CD Player, it's likely because you're starting the recording before the 'x' indication appears in the display. Wait until the 'x' indication appears before you start recording to ensure the entire track is recorded.
What to do if my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) says “DISC FULL”?
If recording cannot be done correctly on your Sony CD Player and “DISC FULL” appears, even if the disc hasn't reached its maximum recording time, this could be because the remaining recordable time on the disc is 48 seconds or less. In this case, replace the disc.
Why is my Sony CD Player not recording correctly?
If you are unable to record correctly on your Sony CD Player, make sure you are recording in Hi-MD mode, as only Hi-MD mode can be used to record directly on this recorder without using a computer. Also, check that the audio sources are securely connected and that there is a digital signal from the portable CD player. When recording digitally, use the AC power adaptor and disable the anti-skip function on the CD player. Ensure you are using a connecting cord without an attenuator and adjust the recording level manually if needed. Disconnect the recorder from the computer during recording. If a power source was disconnected or a power outage occurred, the recording result is not recorded on the disc; make the recording again.
Why are some menu items missing on my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) CD Player?
If some menu items cannot be displayed on your Sony CD Player, the “Menu Mode” might be set to “Simple”. Set the “Menu Mode” to “Advanced” to display all the menu items.
Why does the disc mode on my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) change after formatting?
If the operation mode of the blank 60/74/80- minute standard disc differs from the mode following formatting or the mode selected in the SonicStage software on your Sony CD Player, use the “Disc Mode” menu to change the operation mode as desired. When using a blank 60/74/80-minute standard disc in the recorder, the operation mode set in the “Disc Mode” menu is applied.
Why does my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) skip during playback?
If your Sony CD Player is skipping during playback, it could be due to continuous vibration. Place the recorder on a stable surface. Also, very short tracks may cause sound to skip, so try to avoid creating them.
Why can't I use my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) as a storage device?
If your Sony CD Player is not functioning as a storage device, close the SonicStage or MD Simple Burner software. Also, ensure that a disc used in Hi-MD mode is inserted.
Why is my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) not charging fully via USB?
If the rechargeable battery cannot be charged sufficiently through USB bus power on your Sony CD Player, disconnect the recorder from the computer and charge the rechargeable battery using the AC power adapter.
What does it mean when charging by USB bus power flashes on my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) CD Player?
If your Sony CD Player displays a message that charging by USB bus power cannot be done, and the display flashes, reinsert the rechargeable battery and close the battery compartment lid firmly. Also, ensure that the temperature of the battery-charging location is within the range of +5°C (+41°F) to +35°C (+95°F).
Why does my Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) CD Player get hot while charging?
If your Sony CD Player is getting hot during charging, this is normal and poses no danger.
General| Category | CD Player |
|---|---|
| USB Interface | USB 2.0 |
| Model | MZ-RH10 |
| Recording Media | Hi-MD, MD |
| Compatibility | Mac OS X 10.2 to 10.4 |
| Display | LCD |
| Weight | Approx. 108g (3.9 oz) without battery |
| User Manual | Yes |
Identifies all buttons, jacks, and the display window on the recorder.
Details the meaning of each area and icon in the recorder's display.
Instructions for inserting the rechargeable battery into the unit.
Steps for charging the rechargeable battery using the AC power adaptor.
Steps for selecting source, starting, pausing, and stopping recording.
How to start playback and adjust the volume using controls.
Step-by-step guide on how to enter and use menu items.
Steps to connect a microphone and start recording.
How to manually adjust recording levels for optimal sound.
How to search for tracks by name, group, artist, or album.
Choosing from preset sound modes like Heavy, Pops, Jazz.
How to input titles for tracks, groups, albums, and discs.
Step-by-step guide for inputting track, group, artist, and disc names.
Steps for erasing specific tracks or groups.
Function to erase tracks, groups, or the whole disc.
Procedure to erase all contents on the disc.
How to fine-tune the point for dividing a track.
How to combine tracks by erasing unnecessary track marks.
Restores a disc to its original condition, erasing all data.
Step-by-step guide for connecting the recorder to a computer via USB.
Troubleshooting steps for problems related to battery charging.
Troubleshooting steps for problems encountered during recording.
Troubleshooting for errors like 'DISC FULL' and playback issues.
Troubleshooting playback skips, noise, volume, and sound output.
Troubleshooting problems related to editing and group functions.
Troubleshooting connection issues between computer and MD Walkman.
Troubleshooting computer use and understanding messages.
Troubleshooting general recorder malfunctions and display problems.
Explains common error messages and their remedies.
Explains additional error messages and their remedies.
Explains error messages concerning groups and power issues.
Explains error messages for disc and system operations.
Explains error messages related to disc and track limits.
Lists the necessary hardware and OS specifications for software installation.
Steps before installing software, like closing programs and disconnecting USB.
Instructions for finishing the software installation and restarting.
How to record and store audio data from an audio CD to My Library.
Steps to transfer audio data from computer's My Library to the MD Walkman.
Steps to transfer audio data back from the MD Walkman to My Library.
Steps for recording using MD Walkman operations in Simple mode.
How to start MD Simple Burner and use computer operations.
How to select tracks and get CD information for recording.
Steps to identify and check for software issues.
Common problems and solutions for software installation failures.
Troubleshooting issues where the computer does not recognize the MD Walkman.
