99
Transferring back audio data from the MD Walkman
to your computer
Audio data that has been transferred from your computer and stored on the MD can be
transferred back to My Library of SonicStage on your computer.
1 Insert a disc into the MD Walkman and connect the MD Walkman to your
computer.
Use the supplied dedicated USB cable for the MD Walkman to connect the MD
Walkman to your computer.
For details about connections, see page 63 on “Recorder Operation”.
Do not disconnect the power source or the dedicated USB cable before the transfer has
completed.
2 Point to [Transfer ] on the upper-right side of the screen and click [Hi-MD]
or [Net MD].
The screen is switched to the transfer (Hi-MD or Net MD) screen.
3 In the list on the right side of the screen (Hi-MD or Net MD), click to select
the tracks you want to transfer to your computer.
Transferring from the MD Walkman back to your computer
The My Library
list
List of tracks on
the MD
[Transfer ]
continued
To Next Page
Loading...
Need help?
General
