53
1 While playing the track you want to
erase, enter the menu and select
“Edit” - “Erase” - “Track Erase”.
2 Turn the jog dial to select “OK”, and
then press the jog dial to erase the
track.
The track is erased and the next track
starts to play. All the tracks after the
one erased are automatically
renumbered.
If all tracks in a group are erased, the group is
automatically deleted from the disc.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part (page 54).
1 Select a group you want to erase and
check the contents (see page 40).
2 Press x.
3 Enter the menu to select “Edit” -
“Erase” - “Group Erase”.
4 Turn the jog dial to select “OK”, and
then press the jog dial to erase the
group.
The group is erased.
1 Play the disc you want to erase to
check the contents.
2 Press x.
3 Enter the menu to select “Edit” -
“Erase” - “All Tr Erase”.
“ALL TRACKS WILL BE
ERASED” appears in the display.
4 Turn the jog dial to select “OK”, and
then press the jog dial to erase the
whole disc.
“SYSTEM FILE WRITING” appears
in the display, and all the tracks will
be erased.
When erasing completes, “NO
TRACK” appears in the display in
Hi-MD mode and “BLANKDISC”
appears in MD mode.
To erase a track
Note
To erase a group
To erase the whole disc
To Next Page
Loading...
Need help?
General
