47
Recording a track to an
existing group
You can add a track to an existing group.
1 Press GROUP, and then press . or
> until the group you want to add
a track to appears in the display.
2 Press N while pressing REC •
T MARK.
3 Play the source sound.
Newly recorded track is added after
the current contents in the group.
z
• To add a track that is currently playing to a
group, stop or pause playing the track first,
and then do the procedure from step 2.
• You can set the recorder to always create a
new group without pressing the GROUP
button. See page 56 for details.
Playing groups
The recorder can operate various
playback with a disc which has group
setting.
This section explains the operations that
are done on the remote control. For details
on operations on the recorder, see page 57
Playing a track in group play
In group play, all groups are played in
order, starting with group 1, followed by
the unassigned tracks (“Group - -”).
Playback stops after all the tracks have
been played.
1 During playback, press P-MODE/
repeatedly until “ ” appears in the
display.
To cue to the start of a group
(Group Skip)
1 During playback, press + or –.
Pressing – button cues to the first track
in the current group. Pressing the button
again cues to the first track of the previous
group.
For the recorder operation, see
page 57.
Selecting the play mode for
group play (Group Play Mode)
The shuffle play and repeat play function
can be used during group play mode.
1 Press P-MODE/ repeatedly.
After normal playback (page 36), the
following play modes are displayed.
+, –
P-MODE/
Jog lever
Display Play mode
(Normal
Group Play)
All tracks in the groups
play back once (starting
with the first track in
group 1).
, SHUF
(In-Group
Shuffle)
Shuffle play starts with
the group that is
currently playing, and
continues with the
succeeding groups.
To Next Page
Loading...
Need help?
Power
Battery
Audio Specifications
Weight and Dimensions
