Sony WI-SP510 User Manual

Help Guide
Wireless Stereo Headset
WI-SP510
Initializing the headset to restore factory settings
If the headset does not operate correctly even after resetting, initialize the headset.
Turn off the headset while the USB Type-C cable is disconnected and then press and hold the
(power) button and
the – button simultaneously for 7 seconds or more.
The indicator (blue) flashes 4 times (
), and the headset is initialized. This operation resets volume settings,
etc. to the factory settings, and deletes all pairing information. In this case, delete the pairing information for the headset
from the device and then pair them again.
If the headset does not operate correctly even after initializing, consult your nearest Sony dealer.
5-013-956-11(1) Copyright 2020 Sony Corporation
109

Sony WI-SP510 Specifications

General

Control type	Buttons
Headset type	Binaural
Product type	Headphones
Product color	White
Wearing style	In-ear
Control unit type	In-line control unit
Recommended usage	Sports
Protection features	Water resistant
International Protection (IP) code	IPX5
Standby time	200 h
Battery voltage	3.7 V
Battery recharge time	3 h
Continuous audio playback time	15 h
Bluetooth	Yes
Frequency band	2.4 GHz
Wireless range	10 m
3.5 mm connector	No
Bluetooth version	5.0
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	Wireless
Operating temperature (T-T)	0 - 40 °C
Microphone type	Built-in

Weight and Dimensions

Weight	30 g