Sony WM-EX402 - Cassette Lid Sub Assy; Display Board

– 7 –
3 spring (lid up)
1
2
cassette lid sub assy
cassette lid sub assy
cabinet (front) assy
cabinet (front) assy
2-4. CASSETTE LID SUB ASSY
2-5. DISPLAY BOARD
1 screws
2
1
screws
DISPLAY board
cassette lid
• Use caution when installing the
cassette holder assy
Install the cassette holder with the spring (lid up)
as shown below in the drawing so that it fits into the
holes on the cabinet front assy. Once installed,
fit the left and right pieces on.
• Press on the left & right clips from the rear of the
cabinet (front) assy. and remove the boss.