8
Card remote commander
RM-X158
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
wd PBC button page 10
wf ENTER button page 10
wg < (.)/, (>) buttons
To control CD/VCD/Tape/radio, the same as
(SEEK) –/+ on the unit.
Setup, sound setting, etc., can be operated by
< ,.
wh VOL (volume) +/– button
To adjust volume.
wj ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wk SEL (select) button
The same as the select button on the unit.
wl O (return) button page 10
e; M (+)/m (–) buttons
To control CD/radio, the same as
(ALBM/PRESET) +/–) on the unit.
Setup, sound setting, etc., can be operated by
M m.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc/
cassette is inserted to activate the unit first.
OFF
DSPL
REP SHUF SLOW
PBC
SCRL
SOURCE
SEL MODE
PAU SEOSDAUDIO
132
465
ATT
VOL
+
–
+
–
ENTER
wd
wk
qg
qj
wf
wg
7
wj
wh
ql
wl
e;
6
5
To Next Page
Loading...
