(A) The voice function LED is located at the bottom just left of center of the TV.
(B) The LED located at the bottom center of the TV lights up amber when hands-free
operation is available.
To use the built-in MIC, enable the following setting.
Turn on the built-in MIC switch on the TV.
For the location of the built-in MIC switch on the TV, refer to the Reference
Guide/Setup Guide.
Note
An Internet connection is required to use the built-in MIC on the TV.
After turning on the built-in MIC switch on the TV, you need to press the Google
Assistant/MIC button on the remote control to complete the setup, depending on
your model/country/region. (Only models with the built-in MIC switch)
Power consumption will increase when the built-in MIC is enabled as it is always
listening.
Hint
When the built-in MIC switch on the TV is enabled, the Operational response LED
lights up in amber even when the TV is turned off (you can also set it so it does not
light up).
With the TV's built-in MIC enabled, you can say “Hey Google, Where is the remote
control” to the TV to play a buzzer from the remote control. This is useful when you
cannot find the remote control. For details, refer to Finding the remote control (only
models supplied with a buzzer built-in remote control).
The TV's built-in MIC may pick up sound from the surroundings and respond
unintentionally. You can use [Built-in MIC sensitivity] to change the mic sensitivity.
To Next Page
Loading...
