1
Attach the supplied Camera and Microphone Unit to the Camera port on the back of the
TV. You can adjust the angle and vertical position of the Camera and Microphone Unit.
Removing
To easily remove the supplied Camera and Microphone Unit, twist it slightly as shown in
the figure below.
Hint
For the optional Camera and Microphone Unit (CMU-BC1), attach it to the TV by
following the manual supplied with CMU-BC1.
Note
You may need to update the TV software to use the features of the Camera and
Microphone Unit. Please update if a software update notification is displayed.
Setting the Camera sensing functions
Configure settings related to the sensor of the Camera and Microphone Unit.
Press the (Quick Settings) button on the remote control, and select in the
following order.
To Next Page
Loading...
