[Settings] — [Remotes & Accessories] — [BRAVIA CAM] — the desired item
Available settings
[Auto adjust picture and sound] (BRAVIA XR models only)
The Camera and Microphone Unit detects the user's viewing position and automatically
adjusts the screen brightness, volume, and audio balance.
[Brightness]
Automatically adjusts the brightness according to the viewing distance to make colors more
visible.
[Voice emphasis]
Automatically adjusts the volume according to the viewing distance. If you are far from the TV,
the sound is made more audible.
[Sound balance]
Adjusts the balance so it sounds as if you are viewing from the front of the TV even if are actually
not.
[Proximity Alert]
Notifies you if the TV viewing distance is too close.
You must input your PIN to enable this feature. When enabled, it will be set at 1 m
(default). You can select [Set distance] to set any distance.
[Auto power saving mode]
Automatically switches to power saving, such as reduced brightness, when a user is
not detected in front of the TV for a certain period of time.
[Gesture Control]
Allows use of gestures toward the TV to turn the TV off, adjust the volume, change the
channel, or play back content.
Future software updates may be required to use some features.
Some of the Camera sensing functions added by software updates are added to Quick
Settings, and you can turn On/Off features such as [Auto adjust picture and sound].
For details about software updates, see the Software updates page.
Hint
[BRAVIA CAM] in the Camera and Microphone Unit has features available in addition to
Camera sensing functions. Configure them as necessary.
*
*
*
*
*
To Next Page
Loading...
Need help?
General
