Sony XAV-701BT User Manual

SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
Monitor section
Display type: Wide LCD color monitor
Dimensions:
7.0 in
System: TFT active matrix
Number of pixels:
1,152,000 pixels (800 u 3 (RGB) u 480)
Color system:
PAL/NTSC/SECAM/PAL-M/PAL-N automatic
select
Tuner section
(E (PAL) and South African models)
FM
Tuni ng r ang e: 87.5 – 108.0 MHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (mono)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,
000 Hz
AM
Tuni ng r ang e: 531 – 1,602 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency:
9,124.5 kHz or 9,115.5 kHz/4.5 kHz
Sensitivity: 26 μV
DVD/CD Player section
Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Harmonic distortion: 0.01%
Region code: Labeled on the bottom of the unit
USB Player section
Interface: USB (High-speed)
Maximum current: 1 A
Wireless Communication*
1
Communication System:
Bluetooth Standard version 2.1 + EDR
Output:
Bluetooth Standard Power Class 2 (Max. +4 dBm)
Maximum communication range:
Line of sight approx. 10 m (33 ft)*
2
Frequency band:
2.4 GHz band (2.4000 – 2.4835 GHz)
Modulation method: FHSS
Compatible Bluetooth Profiles*
3
:
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio Video Remote Control Profile) 1.3
HFP (Handsfree Profile) 1.5
PBAP (Phone Book Access Profile)
OPP (Object Push Profile)
*1 Applies to XAV-701BT only.
*2 The actual range will vary depending on factors
such as obstacles between devices, magnetic
fields around a microwave oven, static electricity,
reception sensitivity, antenna’s performance,
operating system, software application, etc.
*3 Bluetooth standard profiles indicate the purpose of
Bluetooth communication between devices.
Power amplifier section
Outputs: Speaker outputs
Speaker impedance: 4 – 8 ohms
Maximum power output: 52 W u 4 (at 4 ohms)
General
Outputs:
Video output terminal (rear)
Audio output terminals (front/rear)
Audio output terminals (ZuZ) (E (NTSC) model)
Subwoofer output terminal
Power antenna (aerial)/Power amplifier control
terminal (REM OUT) (E (NTSC), E (PAL) and
South African models)
Power antenna (aerial) relay control terminal
(Russian model)
Power amplifier control terminal (Russian model)
Inputs:
Illumination control terminal
Remote controller input terminal
Antenna (aerial) input terminal
Parking break control terminal
Microphone input terminal (XAV-701BT only)
Reverse input terminal
Camera input terminal
AUX a
udio input terminals
AUX video input terminals
USB port
External input terminal (E (PAL), South African
and Russian models)
Power requirements: 12 V DC car battery
(negative ground (earth))
Dimensions:
Approx. 178 u 100 u 185 mm
(7
1
/8 u 4 u 7
3
/8 in) (w/h/d)
Mounting dimensions: Approx. 182 u 111 u 160 mm
(7
1
/4 u 4
3
/8 u 6
3
/8 in) (w/h/d)
Mass:
Approx. 2.4 kg (5 lb 5 oz)
Supplied accessories:
Parts for installation and connections (1 set)
Microphone (XAV-701BT only)
Remote Commander: RM-X271
Your dealer may not handle some of the above listed
accessories. Please ask the dealer for detailed
information.
US and foreign patents licensed from Dolby
Laboratories.
Design and specifications are subject to change
without notice.
Region code
The region system is used to protect software
copyrights.
The region code is located on the bottom of the unit,
and only DVDs labeled with an identical region code
can be played on this unit.
DVDs labeled can also be played.
If you try to play any other DVD, the message “Disc
playback prohibited by region code.” will appear on the
monitor screen. Depending on the DVD, no region code
may b
e labeled even though playing the DVD is
prohibited by area restrictions.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and Thomson.
ALL
FM1/FM2: 87.5 - 108.0 MHz (at 50 kHz step)
FM3: 65 - 74 MHz (at 30 kHz step)
Tuner section (Russian model)
FM
Tuning range:
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
MW/LW
Tuning range:
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency:
9,124.5 kHz or 9,115.5 kHz/5 kHz
Sensitivity: MW: 26 μV
, LW: 46 μV
Tuner section (E (NTSC) model)
FM
Tuning range:
87.5 – 108.0 MHz (at 100 kHz step)
87.5 – 107.9 MHz (at 200 kHz step)
FM tuning step: 100 kHz/200 kHz switchable
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (mono)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
AM
Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal:
External antenn
a (aerial) connector
Intermediate frequency:
9,115 kHz or 9,125 kHz/5 kHz
Sensitivity: 26 μV
XAV-701BT/741
SPECIFICATIONS
AV CENTER
9-893-471-03
2012K33-1
©
2012.11
E Model
Russian Model
XAV-701BT/741
South African Model
XAV-701BT
Ver. 1.2 2012.11
Photo: XAV-701BT
DVD Section
Model Name Using Similar Mechanism NEW
DVD Mechanism Type MG-613XF-187 or MG-614D-189
Optical Pick-up Name KHS-360A or TOP1300SE C11
OPEN/CLOSE
Section
Model Name Using Similar Mechanism XAV-W1
Monitor Open/Close Block DB-W07

Sony XAV-701BT Specifications

General

Brand	Sony
Model	XAV-701BT
Category	Car Stereo System
Language	English

Summary

SPECIFICATIONS

Monitor section

Details of the Wide LCD color monitor specifications, including dimensions and pixel count.

Tuner section (E (PAL) and South African models)

FM and AM tuning ranges, intermediate frequencies, sensitivity, selectivity, and frequency response.

DVD/CD Player section

Specifications for the DVD/CD player, including signal-to-noise ratio and distortion.

Wireless Communication*1

Outlines Bluetooth version, power class, range, and frequency band for wireless connectivity.

Power amplifier section

Specifies speaker outputs, impedance, and maximum power output of the amplifier.

SECTION 1 SERVICING NOTES

NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT

Precautions for preventing electrostatic breakdown and handling delicate flexible boards of the optical pick-up.

UNLEADED SOLDER

Explains characteristics of unleaded solder and precautions for its use in repairs.

IMPORTANT NOTE FOR REPAIRING (XAV-701BT only)

Warns about data loss on the XAV-701BT during repairs like display board replacement or initialization.

NOTE THE IC4 AND IC11 ON THE SERVO BOARD REPLACING

Advises that IC4 and IC11 on the SERVO board cannot be exchanged individually and require board replacement.

MODEL IDENTIFICATION

Provides a diagram showing the location of the model identification label on the bottom view of the unit.

SECTION 3 DISASSEMBLY

3-1. DISASSEMBLY FLOW

Provides a step-by-step flow chart for disassembling the unit, indicating page numbers for each step.

3-2. FRONT PANEL BLOCK

Details the procedure for disassembling the front panel block, including notes on power and flexible cable installation.

3-6. DISPLAY BOARD

Explains how to remove the display board, including desoldering, bending claws, and handling heat transfer sheets.

3-12. DVD MECHANISM DECK (MG-613XXF-187)

Details the removal of the DVD mechanism deck, including flexible flat cable installation notes.

3-22. SERVO BOARD

Provides steps for removing the SERVO board, including desoldering wires and disconnecting flexible boards.

SECTION 4 ELECTRICAL ADJUSTMENTS

MONITOR SECTION

Details the procedure for executing the "Flicker Adjustment" after replacing monitor or display components.

FLICKER ADJUSTMENT

Step-by-step guide for performing flicker adjustment using communication software and a remote commander, explaining input commands and value changes.

SECTION 5 DIAGRAMS

5-1. BLOCK DIAGRAM - SERVO Section -

Shows the overall block diagram of the SERVO section, illustrating signal paths and major components.

5-4. PRINTED WIRING BOARDS - SERVO Section -

Provides the printed wiring board layout for the SERVO section, identifying component placement.

5-5. SCHEMATIC DIAGRAM - SERVO Section (1/3) -

Presents the first part of the SERVO section schematic diagram, detailing circuit connections and component values.

5-8. PRINTED WIRING BOARD - MAIN Board (Component Side) -

Shows the component side layout of the MAIN board's printed wiring, highlighting major ICs and connectors.

5-10. SCHEMATIC DIAGRAM - MAIN Board (1/4) -

Presents the first part of the MAIN board schematic, detailing power supply and control circuits.

SECTION 6 EXPLODED VIEWS

6-1. OVERALL SECTION

An exploded view of the entire unit, showing the main assembly and parts with their reference numbers.

6-2. FRONT PANEL SECTION

An exploded view of the front panel assembly, detailing components like the display, touch panel, and base panel.

6-3. KEY7 BOARD SECTION

An exploded view of the KEY7 board assembly, showing buttons, filters, and covers with their respective part numbers.

6-5. MAIN BOARD SECTION

An exploded view showing the MAIN board, including its connections to the FM/AM tuner unit and DC fan.

6-7. DVD MECHANISM DECK SECTION (MG-613XF-187)

An exploded view of the DVD mechanism deck, showing chassis, springs, dampers, servo board, and screws.

SECTION 7 ELECTRICAL PARTS LIST

EXT-NAVI BOARD

Lists electrical components for the EXT-NAVI board, including capacitors, connectors, ICs, transistors, resistors, and flexible cables.

MAIN BOARD, COMPLETE (XAV-701BT: SAF)

Lists part numbers for the complete MAIN board for the XAV-701BT (SAF) model.

SERVO BOARD, COMPLETE

Lists electrical components for the SERVO board, including switches, capacitors, connectors, ICs, transistors, and resistors.

MG-613XF-187/MG-614D-189 DISCRIMINATION