Need help?Do you have a question about the Sony XM-1502SX and is the answer not in the manual?
General| Type | Amplifier |
|---|---|
| Channels | 2 |
| THD at RMS Power | 0.05% |
| Signal to Noise Ratio | 100 dB |
| Bass Boost | 0-10 dB at 40 Hz |
| Input Sensitivity | 0.3 - 6 V |
| Frequency Response | 5 Hz - 50 kHz |
Connects the car amplifier to speakers and power source, detailing mono/stereo configurations.
Explains the main functional blocks of a modern high power car amplifier.
Details the power-on sequence and audio muting control for the amplifier.
Describes the operation of the switching power supply's oscillator and output stage.
Explains the operation of the amplifier's output stage, including differential amplifiers.
Guides on troubleshooting the amplifier's output stage, focusing on DC balancing.
Describes the thermal protection circuit that stops the power supply oscillator.
Explains the offset protection circuit that monitors speaker output DC voltage.
Details the over-current protection circuit that monitors speaker output current.
Details the operation of the XAV-7W in-dash receiver and its motorized display.
Details the backlight operation for the XAV-7W's LCD display.
Details how to record music from CDs to the MEX-1HD's hard drive.
Provides a procedure for recording music from a CD to the internal hard drive.
Explains how to copy songs from the hard drive to a Memory Stick.
Details the procedure for transferring music from a Memory Stick back to the HDD.
To Next Page
