Help Guide
In-Car Receiver
XAV-9500ES
Application
Camera Input
Selects a camera view mode: [Default], [Flip Display].
[Rear Camera Guide Line Adjust] displays the rear camera guide lines.
[Rear Camera Interruption] displays the video of the rear view camera connected to the REAR CAMERA IN cable when
you put the gear shift in R (reverse).
SXM Reset (XAV-9500ES(UC))
Initializes the SiriusXM Connect Vehicle Tuner settings (preset channels/parental lock): [Reset], [Cancel].
Maestro Input Level (XAV-9500ES(UC))
Adjusts the relative volume level to the signal input from the iDataLink Maestro module: –8 to +8.
(Available only when the connection with iDataLink Maestro is established.)
Maestro Settings (XAV-9500ES(UC))
Displays the menus for your original car settings and setting for the iDataLink Maestro module. Your display will vary
based on the firmware in the iDataLink Maestro module.
(Available only when the connection with iDataLink Maestro is established.)
Radio Tuning Steps (XAV-9500ES(E)/XAV-9500ES(E17)/XAV-9500ES(IN))
Sets the FM/AM tuning step of your country or region.
Related Topic
Basic Setting Operation
5-021-904-11(1)
Copyright 2021 Sony Corporation
To Next Page
Loading...
