EasyManuals Logo

Sony XAV-AX5000 User Manual

Sony XAV-AX5000
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9GB
To use a paired device, connection with this unit is
required. Some paired devices will connect
automatically.
1 Press HOME, then touch [Settings].
2 Touch [Bluetooth].
3 Touch [Bluetooth Connection], then touch
[ON].
Make sure that lights up on the status bar of
the unit.
4 Activate the BLUETOOTH function on the
BLUETOOTH device.
5 Operate the BLUETOOTH device to connect
to this unit.
or lights up on the status bar.
To connect the last-connected device from
this unit
When the ignition is turned to on with the
BLUETOOTH signal activated, this unit searches for
the last-connected BLUETOOTH device, and
connection is made automatically.
Note
While streaming BLUETOOTH audio, you cannot connect
from this unit to the cellular phone. Connect from the
cellular phone to this unit instead.
To install the microphone
For details, see “Installing the microphone”
(page 29).
Connecting Rear View Camera
By connecting the optional rear view camera to the
CAMERA IN terminal, you can display the picture
from the rear view camera. For details, see
“Connection/Installation” (page 27).
To display the picture from the rear view
camera
Press HOME, touch [Rear Camera].
Listening to the Radio
To listen to the radio, press HOME then touch
[Tuner].
Reception controls/indications
Current band
Change the band (FM1, FM2, FM3, AM1 or AM2).
Current frequency, program service name*,
RDS (Radio Data System) indication*
* During RDS reception.
(tuner option)
Open the tuner option menu.
SEEK-/SEEK+
Tune in automatically.
/
Tune in manually.
Touch and hold to continuously skip
frequencies.
Preset numbers
Select a preset station. Swipe right/left to show
the other preset stations.
Touch and hold to store the current frequency in
that preset.
1 Select the desired band (FM1, FM2, FM3,
AM1 or AM2).
2 Perform tuning.
To tune automatically
Touch SEEK-/SEEK+.
Scanning stops when the unit receives a station.
To tune manually
Touch and hold / to locate the approximate
frequency, then touch / repeatedly to fine
adjust to the desired frequency.
Connecting with a paired BLUETOOTH
device
Listening to the Radio
Tuning

Other manuals for Sony XAV-AX5000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony XAV-AX5000 and is the answer not in the manual?

Sony XAV-AX5000 Specifications

General IconGeneral
Display Size6.95 inches
TouchscreenYes
BluetoothYes
Apple CarPlayYes
Android AutoYes
USB Ports1
USB InputYes
Backup Camera InputYes
Steering Wheel Control CompatibleYes
DIN SizeDouble DIN
DisplayCapacitive Touchscreen
Resolution800 x 480
AM/FM TunerYes
Preamp Outputs3 (Front, Rear, Subwoofer)
RMS Power Output20 watts x 4
SiriusXM ReadyYes
Compatible Audio FormatsMP3, WMA, AAC, FLAC
Power Output55 watts x 4 channels

Related product manuals