Sony XM-2020 User Manual

SONY
Stereo Power Amplifier
3-750-642-21
XM-2020
Operating Instructions
Before operating the unit, please read this
manual thoroughly and retain it for tuwre
reference.
Sony Corporation ©1969 Printed in Japan
Features
Maximum power oulput of 35 watts per
channel °
@ Wide dynamic range end low distortion (less
than 0.005%)
© A ramote power system automatically
swiches the amplifier on when a connected
car stereo ls tured on,
A protection circutt is provided.
© You can install the XM-2020 easily only with
the supplied hardware or velcro tapes.
Owner’s Record
The model and serial numbers are focated on
Mode d’emploi
Avant la mise en service de l'appareil, ire
Caracteristiques
© Pulssance de sortie maximum de 35 watts pi
canal.
factloment en utilisant les vis foumnies ou un
ruban adhéait.

Sony XM-2020 Specifications

Audio Specifications

power output	20 watts per channel minimum
total harmonic distortion	0.5%
frequency range	20-20, 000 Hz

Power

battery voltage	12 V DC
current drain	6 A
negative ground	yes

Weight and Dimensions

dimensions	130 x 32 x 60 mm
weight	36 ounces

Summary

Operating Instructions

Features

Highlights key technical specifications and functionalities of the amplifier.

Owner's Record

Section for recording unit's serial number for future reference and dealer inquiries.

Precautions

Fuse Replacement

Guide for replacing the fuse and warnings about using incorrect amperage.

Installation

To Install with the Mounting Hardware

Step-by-step instructions for attaching the unit using screws and mounting hardware.

To Install with the Velcro Tapes

Instructions for securing the amplifier using the provided velcro tape.

Connections

How to Attach the Connecting Cord

Procedure for detaching the connecting cord from the unit's connector.

Connection Example

Diagram illustrating the proper wiring connections to the car stereo and speakers.

Level Adjustment Control

Guidance on adjusting the input level for optimal sound matching with the source.

Specifications

AUDIO POWER SPECIFICATIONS

Details on power output and total harmonic distortion per industry standards.

Other specifications

Lists other technical details including power supply, impedance, dimensions, and weight.