1 Charging/Notification light
2 NFC
3 Volume/Zoom key
4 Power key
5 Nano SIM/Memory card slot
6 Camera key
7 Charger/USB Type-C™ cable port
To insert the nano SIM card and the
memory card
Do not cut your SIM card, for example using a blade or
scissors, as this may damage your device.
1
Using your fingernail, drag out the SIM card tray.
2
Firmly place the SIM card in the correct orientation as
shown in the illustration.
3
Insert the memory card in the correct orientation into the
memory card slot as shown in the illustration.
4
Gently push the tray back into the slot until it fits into
place.
To turn on the device
It is important to use the USB Type-C™ cable (provided)
when charging your device as other types of USB cables
can damage your device. It is recommended to charge
the battery for at least 30 minutes before you turn on the
device for the first time.
1
Press and hold down the power key
until the device
vibrates.
2
Wait a moment for the device to start.
To Next Page
Need help?
General
