Help Guide
Wireless Speaker
SRS-XV800
About the indicators
CHARGE indicator (orange)
Note
While the speaker is turned on, it charges the built-in battery as long as the speaker is connected to an AC outlet by the supplied
AC power cord (mains lead).
Depending on the usage of the speaker, however, it may take a long time before charging completes. It is recommended that you
turn off the speaker before battery charging.
If the ambient temperature is extremely low or high, the speaker will stop charging the built-in battery for safety reasons. It may
also stop charging if charging continues for a long period of time. If such an event occurs, bring the temperature up or down to an
operating temperature between 5 °C and 35 °C (41 °F and 95 °F), disconnect and reconnect the AC power cord (mains lead),
and then let the speaker charge the built-in battery once again.
(power) indicator
Unlit The speaker has completed charging.
Lit The speaker is being charged.
Slow flashing The built-in battery is running at 20% or less and needs to be charged.
Flashes 3 times
and turns off
In the event that the CHARGE indicator flashes 3 times and then the speaker turns off after the
speaker is turned on, the built-in battery is empty and needs to be charged.
Unlit The speaker is turned off.
Lit (green) The speaker is turned on.
Lit (orange) The speaker is turned off. The BLUETOOTH standby function is activated.
Flashes (green
or orange)
Each time you touch –/+ (volume) on the speaker, the indicator flashes once in green.
When you operate –/+ (volume) on the speaker and the volume is set at the lowest (0) or
highest (50) level, the indicator flashes 3 times in green.
When
(play) and – (volume) on the speaker are touched and held simultaneously for about
5 seconds and the Auto Standby function is turned off, the indicator flashes 3 times in orange.
When
(play) and – (volume) on the speaker are touched and held simultaneously for about
5 seconds and the Auto Standby function is turned on, the indicator flashes twice in orange.
When
(play) and (BLUETOOTH) on the speaker are touched and held simultaneously for
about 2 seconds and the “Priority on Stable Connection” preference is selected for the
BLUETOOTH connection quality, the indicator flashes 3 times in green.
When
(play) and (BLUETOOTH) on the speaker are touched and held simultaneously for
about 2 seconds and the “Priority on Sound Quality” preference is selected for the
BLUETOOTH connection quality, the indicator flashes twice in green.
To Next Page
Loading...
