ZV-1
5-017-151-31(1)
GB
4
C:\5017151311_Book\5017151311ZV1CE3\01GB-ZV1CE3\01GB.indd
DTP data saved: 2019/12/12 09:01
PDF file created: 2019/12/12 09:01
Memory card
Insert the memory card with the notched corner facing as illustrated.
This camera is compatible with SD memory cards or Memory Stick media.
For details on the compatible memory cards, refer to the “Help Guide.”
When you use a memory card with this camera for the first time, format the
card using the camera in order to stabilize the performance of the memory
card.
Note
• Formatting erases all data, including protected images and registered
settings (M1 to M4). Once erased, this data cannot be restored. Save
valuable data to a computer, etc. before formatting.
Charging the battery pack
Charge lamp
1 Turn the power off.
If the camera is turned on, the battery pack will not be charged.
2 With the battery pack inserted, connect the camera to the computer
using the micro USB cable (supplied).
The charge lamp will light up when charging starts. When the charge
lamp turns off, charging is completed.
To Next Page
Loading...
