SOOCAS X3 - Using Your Toothbrush; Step 1: Install Brush Head; Step 2: Prepare for Brushing; Step 3: Brushing Technique

USING YOUR TOOTHBRUSH STEP 1:
Install the brush head on the handle and make sure that there
is a space between the two parts. (The space can prevent the
head collides with the handle when it vibrates quickly and can
improve the motor’s power. Because stains can easily hide
in the space, we suggest that you disassemble and clean the
brush head regularly.)
STEP 3:
Step 2:
Guide the brush head slowly from tooth to tooth with a 45
degree angle between bristles and gums line.
You can press the on/off button to change thebrushing mode.
The toothbrush may vibrate frequently during use to
remind you that you should brush another place.
Wet the brush head and apply
toothpaste on the brush head.
Switch on: Press and release the
button
Mode: Press the button when the
toothbrush is on to change brush-
ing mode.
Switch off: When the product is
on, it stops after the mode is switched/
press and hold the button to stop it.
If any exception occurs, press and
hold the button for 12 seconds to
restore default setting.
On/off/mode switch
0.4-1(mm)