The figure shows:
*Insertion direction of
the toothbrush
CHARGING
After the charging dock is connected to power supply, the
LOGO on the dock lights up;
Clean the toothbrush and put it on the dock as shown in the
figure. The LOGO light becomes stronger.
During the charging process, the energy LED indicator will
flicker. After it is fully charged, three LED indicators will re-
main on for about 2 minutes before they light off;
The charging process takes more than 16 hours when the
energy LED indicator is red.
CLEAN BRUSH HEAD
After brushing, rinse your brush head under running water.
After cleaning, cover the protective cap to keep the tooth-
brush clean.
To Next Page
Loading...
