Need help?Do you have a question about the Sophos AP 55 and is the answer not in the manual?
General| Frequency Band | 2.4 GHz and 5 GHz |
|---|---|
| Antenna Type | Internal |
| Management | Sophos Central |
| Wireless Standards | 802.11a/b/g/n/ac |
| Power over Ethernet (PoE) | 802.3af |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Maximum Clients | Up to 100 |
| Security Features | WPA3, WPA2 |
| Mounting | Wall, Ceiling |
| MIMO | 2x2 MIMO |
| Ethernet Ports | 1 x 1 GbE |
Update UTM appliance and ensure valid Wireless Protection subscription for operation.
Connect the access point to the internal network via RJ45 or LAN (PoE) Ethernet interface.
Power the access points using a PoE-injector or PoE-compliant switch.
Enable DHCP for access points and ensure UTM is the default gateway or route.
Configure Wireless Protection in WebAdmin, setting up a guest network and services.
Accept pending access points in WebAdmin, assign channels and locations for seamless integration.
Lists included items for Sophos AP 15, including the unit, power supply, and antennas.
Details on how to mount the Sophos AP 15 on a wall using the provided kit.
Explains LED indicators and available physical interfaces like 12V DC-IN and LAN (PoE).
Detailed technical data for Sophos AP 15, covering chassis, throughput, standards, and regulatory compliance.
A printable template for wall mounting the Sophos AP 15 access point.
Lists included items for Sophos AP 15C, including the unit, PoE injector, and mounting bracket.
Instructions for ceiling mounting the Sophos AP 15C using the provided bracket.
Details LED status indicators and physical interfaces for the Sophos AP 15C.
Comprehensive technical data for Sophos AP 15C, including specifications and compliance details.
Lists items included with the Sophos AP 55, such as the unit, PoE injector, and antennas.
Guidance on wall mounting the Sophos AP 55 using the included mounting kit.
Explains LED indicators and physical interfaces for the Sophos AP 55, including Console and USB ports.
Detailed technical specifications for the Sophos AP 55, covering performance, features, and regulatory aspects.
Details the items provided with the Sophos AP 55C, including the access point and mounting hardware.
Instructions for ceiling mounting the Sophos AP 55C, detailing bracket installation and unit placement.
Explains the LED indicators and physical interfaces for the Sophos AP 55C.
Comprehensive technical data for Sophos AP 55C, including radio frequency details and compliance standards.
Lists the components included with the Sophos AP 100, such as the unit, PoE injector, and antennas.
Guidance on wall mounting the Sophos AP 100 using the provided mounting kit.
Describes the LED status indicators and physical interfaces available on the Sophos AP 100.
Detailed technical specifications for the Sophos AP 100, covering throughput, standards, and environmental factors.
Outlines the items provided with the Sophos AP 100C, including the access point and mounting accessories.
Instructions for ceiling mounting the Sophos AP 100C, including bracket and unit placement.
Explains the LED indicators and physical interfaces for the Sophos AP 100C.
Comprehensive technical data for Sophos AP 100C, including radio frequency details and compliance standards.
Lists the components included with the Sophos AP 100X, such as the unit, PoE injector, and mounting hardware.
Guidance on pole mounting the Sophos AP 100X, including important safety and grounding information.
Details the LED status indicators and physical interfaces for the Sophos AP 100X, including LAN and Reset.
Detailed technical specifications for the Sophos AP 100X, covering mounting, throughput, and regulatory compliance.
Steps and warnings for installing the PoE injector to power Sophos Access Points.
Explains the LED display indicators and physical interfaces of the PoE injector.
Technical data for the PoE injector, including input/output specifications and regulatory compliance.
To Next Page
