Sorelle 228 - User Manual

Full - size Conversion Kit
Trousse de Conversion à un lit pleine grandeur
INSTRUCTIONS D'ASSEMBLAGE
Assembly Instruction
Made in Thailand / Fabriqué en Thailand
Important Information: / Information Importante :
Read all instructions BEFORE assembling crib / Lire attentivement toutes les instructions avant de procéder à l’assemblage du lit.
KEEP INSTRUTIONS FOR FUTURE USE / CONSERVER LES INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.
IIMPORTED BY C&T International, Inc. / IMPORTE` PAR de C&T International, Inc.
CANADA ADDRESS:
46 Whelan Road, East Rutherford, NJ 07073 U.S.A.
3453, DU PRESIDENT KENNEDY LAC MEGANTIC, QUEBEC, CANADA G6B 2Y4
Tel, 201-531-1919 Fax, 201-531-1920
Website: www.sorellefurniture.com / Site Internet : www.sorellefurniture.com

Summary

Adult Bed Assembly Steps

Step 1: Attach Additional Right Post

Attach the additional right-front post (Part W) to the footboard using three bolts.

Step 2: Attach Bed Rails

Attach each bed rail (Part A) to the footboard with posts using two bolts and washers.

Step 3: Attach Bed Rails to Headboard

Attach bed rails (Part A) to the headboard with posts using bolts, nuts, and washers.

Step 4: Install Cross Slats

Attach each cross slat (Part B) to the bed rails (Part A) using screws.

Step 5: Tighten All Bolts

Ensure bed rails are adjusted and tighten all bolts using the M4 Hex Wrench.

Changer Table Assembly Steps

Step 1: Prepare Components

Unassemble crib and gather components for changer table assembly.

Step 2: Attach Left Rear Leg

Attach the additional left rear post (Part V) to the changer table.

Sorelle 228 Specifications

General

Type	Crib
Material	Wood
Style	Traditional
Convertible	Yes
Model Number	228
Brand	Sorelle