Sorelle Paris - Step 1: Left Panel Assembly; Step 2: Left Panel Assembly

page 6
SORELLE
A.
B.
C.
D.
.
Install Screws (e) into Drawer Sides (S &R) and align with pilot holes located in the Drawer Back (T).Tighten using
Phillips screw driver(not included) .
Slide Drawer Bottom (U) into Grooves located in Drawer sides (S &R) as well as Drawer Back (T). See Figure . 1
Install Screws (e) into Drawer Sides (S &R) and align with pilot holes located in the mounting blocks of Drawer Front (V).Tighten using
Phillips screw driver(not included) .
Using Drawe
r Knob Screw (j) , install one Knob (k) on drawer.
2
STEP 2 LEFT PANEL ASSEMBLY
STEP 1 LEFT PANEL ASSEMBLY
A..
e
e
e
e
Drawer Left(R)
Drawer Right(S)
Drawer Back(T)
Drawer Bottom (U)
Drawer Front(V)
Using four 4 x bolt (b), assemble Back Left Leg (G)
and Front Left Leg (H) to Left Side Rail (C).
Make sure all mattress support
holes are facing in. Figure 2.
(k)
(j)
4x
b
m
b
b
b
b
Left Side
Rail(C)
Back Left
Leg(G)
Front Left
Leg(H)
4. Using Drawer Knob
Screw (j) , install one (1)
Knob (k) on Drawer.