To Next PageTo Next Page
Need help?Do you have a question about the Sound Devices 552 and is the answer not in the manual?
General| Channels | 5 |
|---|---|
| Inputs | 5 |
| Phantom Power | 48V |
| Maximum Input Level | +24 dBu |
| Battery Life | Up to 6 hours |
| Recording Format | WAV |
| Sample Rates | 48kHz, 96kHz |
| Bit Depth | 24-bit |
| Metering | LED |
| Power Source | Internal battery or external power |
| Microphone Inputs | 5 |
| Line Inputs | 5 |
| Frequency Response | 20 Hz to 20 kHz |
| THD+N | <0.005% |
Detailed explanation of all controls and indicators on the front panel.
Overview of connectors, controls, and physical construction of rear, side, and top panels.
Configure input signal type and apply phantom power to microphone inputs.
Adjust input gain, fader levels, and apply high-pass filters for signal shaping.
Control signal routing, polarity, and link channels for stereo or MS operation.
Temporarily remove an input signal from the main mix.
Configure master output levels, types (XLR, TA3, 10-pin), and digital AES outputs.
Details on direct, tape, and mono mic output connectors and their uses.
Select WAV/MP3 formats, bit depth, and manage SD cards and file structure.
Details on the Synthetic Voice for Enhanced Navigation (SVEN) system.
Control headphone volume, select sources, and understand headphone cues.
Monitor return signals, use loopback, and configure talk back for communication.
Power the mixer using internal AA batteries or external DC sources.
Set and use the built-in clock for file stamping and time information.
Interconnect mixers and configure settings via the setup menu and shortcuts.
Understand limiter functions and view detailed connector pinout information.
Review technical specifications and signal flow diagrams.
Information on accessories, Wave Agent software, compliance, and warranty details.
