3
• SB512 WIRELESS SPEAKER
• MICROUSB CABLE
• SUCTION CUP
• CAMPING SNAP HOOK
• USER GUIDE
IN THE BOX
4
Please charge SB512 for 3 full hours prior to the initial
use.
1. Be sure that SB512 is in power off mode. Place the
mobile phone or media player device next to SB512.
Press and hold the power button for 5 seconds to
enter the pairing mode, followed by red and blue
alternating LED light, indicating the pairing mode.
2. Search for the wireless device SB512 from the media
device to pair with. Enter passcode “0000” if the
media device prompts for a passcode.
3. If pairing fails, please refer to the user manual of
mobile phone for wireless setup. Remove all the
excessive unused models from the list of paired
devices and start over from step 1 again.
WIRELESS PAIRING
To Next Page
Loading...