EasyManua.ls Logo

Soundcore BeatLight B32 - Important Safety Instructions

Soundcore BeatLight B32
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Important Safety Instructions
Read all the instructions before using the product, refer to the information
on the exterior bottom enclosure for electrical and safety information before
installing or operating the product.
1. Store the product in a cool and dry place.
2. Do not store the product in a hot or humid environment.
3. Keep out of the reach of children.
4. Do not touch the product for a long time when powered on.
5. Power off and unplug the adapter when not use for an extended period of
time.
6. Do not connect the rope light to the supply while it is in the packing or
wound onto a reel.
7. Do not use the rope light when covered or recessed into a surface.
8. Keep away from any sharp objects. Do not open or cut or bend the rope
light.
9. Use of a power supply or charger not recommended or sold by the
product manufacturer may result in a risk of fire or injury to persons.
10. Operating temperature should be between 0°C to 40°C.
11. Do not disassemble the product or make unauthorized alterations to
the product; doing so may compromise safety, regulatory compliance,
system performance, and may void the warranty.
12. Do not clean the product with harmful chemicals or detergents.
13. Misuse, dropping or excessive force may cause product damage.
14. Do not subject the product to mechanical shock, crushing, or cutting.
15. Do not short-circuit the product or be short-circuited by other metal
objects.
16. Do not put fingers or hands into the product.
17. Do not use the product in excess of its output rating. Overload outputs
above rating may result in a risk of fire or injury to persons.
18. Do not use the product that is damaged or modified. It may exhibit
unpredictable behavior resulting in fire, explosion, or risk of injury.
19. Do not connect the chain to the supply while it is in the packaging.