Need help?Do you have a question about the Soundcore Boom 2 and is the answer not in the manual?
General| Audio Output Mode | Stereo |
|---|---|
| Number of Speakers | 2 |
| Output Power | 80W |
| IP Rating | IPX7 |
| Play Time | 24 Hours |
| Bluetooth Version | 5.3 |
| Light Show | Yes |
| PartyCast | Yes |
| BassUp Technology | Yes |
| EQ Customization | Yes |
| USB-C Charging | Yes |
| AUX Input | Yes |
Press the Bluetooth button to enter pairing mode and select "soundcore Boom 2" from the list to connect.
Connect two speakers via Bluetooth for TWS mode by pressing and holding the Bluetooth button for 2 seconds.
Details the function of buttons like Power, Volume, Play/Pause, BassUp, and PartyCast on the device.
Press the PartyCast button on multiple speakers to synchronize audio and light.
Keep the product within 0°C to 40°C and avoid excessive heat like direct sunlight or fire.
Caution against replacing the battery with an incorrect type due to explosion risk.
States product compliance with EU directives and provides a link to the full declaration.
Lists maximum output power and frequency band for the device.
Information on FCC compliance, operation conditions, and interference.
Reports the highest SAR value for body/limb use with minimum separation distance.
Details compliance with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
States compliance with IC RSS-102 for SAR and testing methods.
Confirms compliance with Canadian standard ICES-003 (B) / NMB-003 (B).
To Next Page