Product information: Check the product name and software version, or read the
user guide.
Firmware update: You will be informed once a new version of firmware is
detected when you connect the speaker with the app.
Battery status: Indicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the buttons
on the speaker.
EQ settings: There are 4 preset EQ settings you can choose from in the app to
optimize your experience while enjoying different music genres.
• soundcore Signature: Standard EQ mode optimized for well-balanced sound.
• Voice: Voices stand out more clearly from other ambient sounds.
• Balance: No enhancement for high-frequency and low-frequency sounds.
• BassUp: Turn on BassUp to enhance the low-frequency sound.
Set auto-power off time: Set an auto-power off time. The speaker will automatically
turn off when the time is up.
Light effects: Besides the music-sync light effects, you can also choose your favorite
light effects.
Voice prompt: Mute or restore the voice prompt while powering on/off.
Reset
Press and hold the Bluetooth button and volume up button simultaneously for at
least 4 seconds to reset the speaker.
Specications
DC Power Input 5V 3A
Battery Capacity 3350mAh/7.2V
Audio Output Power 30W
Speaker Driver 2.5" Full Range x1
Charging Time 4 Hours
Play Time (varies by volume level and
music content)
Up to 18 Hours
Waterproof Level IP67
Bluetooth Version 5.3
Bluetooth Range 100m / 328ft
To Previous Page
Loading...
