Declaration of Conformity
Hereby, Anker Innovations Limited declares that the radio equipment type A3371 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
https://www.anker.com/products
Maximum output power: 0dBm
Frequency band: 2.4G band (2.4000GHz-2.4835GHz)
Anker Innovations Limited / Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong
Specifications
When not in use, store your soundbar in a cool place.
When turned on, Soundcore Infini will automatically connect to the last connected
device if available. If not, press and hold the Bluetooth button (or source input
button) for 3 seconds on the remote control or press the source input button on the
soundbar for 3 seconds to activate Bluetooth mode.
Having connection problems? Remove Soundcore Infini from your device’s
Bluetooth history and ensure it’s less than 10 meters away. Then try pairing again.
To get the best sound quality, make sure there is a clear line of sight between the
connected device and your soundbar.
To Next Page
Loading...
