Soundcore Life Dot 2 - Reset; Specifications

05 EN
Reset
1. Place the earbuds into the charging case and make sure they are being charged.
2. Press and hold the button on both earbuds for 8 seconds until the LED indicators
on earbuds ash red for 3 times.
All the memory data will be cleared.
8”
Specifications
Specications are subject to change without notice.
Input 5V 2.5A
Rated output power 5 mW (@1% THD)
Battery capacity 85 mA x 2 (earbuds); 2600 mA (charging case)
Charging time 1.5 hours
Playtime (varies by volume level
and content)
8 hours (Total 100 hours with the charging case)
Driver size 8 mm x 2
Frequency response 20 Hz - 20 kHz
Impedance 16 Ω
Waterproof level IPX5
Bluetooth version V 5.0
Bluetooth range 10 m / 33 ft